Liberty Metal W/ Lady Liberty Engraved: 308 Bullet Pen
The Lady Liberty/Liberty Metal 308 Bullet Pen is made from the casings of fired 308 rounds. The casings are first prepped (cleaned and then sandblasted with Aluminum Oxide) and then off gassed (baked) for 30 minutes to insure no contaminants are left behind that would interfere with the Cerakote process. Next the casings get a 2 layer base coat of Burnt Bronze Cerakote followed by a flash cure so the Cerakote partially drys and the casing can be handled. Next a coat of Robin Egg Blue Cerakote is added and then flash cured again. The casing then get distressed distress to give it the Patina look. Next the casings go in the oven for 2 hours at 250 degrees to get fully cured. Once the casings are fully cured they get an acetone bath to insure the Cerakote properly adhered to the casing and the Cerakote layers adhered to each other. Cerakote is a ceramic paint and when applied properly will not be affected by thinners or acetone. If the casings are good to go they are cleaned and sent to the Laser Engraver to add the Lady Liberty engraving. When they come back the casing are polished and then assembled into pens.
Our 308 Pens come with Black Ink. The ink cartridges are replaceable, which can be done by firmly gripping the top and bottom casing and pull away from the center completely pulling the pen apart, unscrew the ink cartridge, and replace it with a new one. The 308 pens take a Cross Pen style ink cartridge.